tomkatt

joined 1 year ago
[–] tomkatt 6 points 2 hours ago

I've ditched all of them except the Disney/Hulu bundle, and that's only because Amex gives me back $7 a month of the cost.

Amazon Prime used to be okay as a Prime customer, but now you can't watch a 24 minute show without seeing like five ads. I tried to watch an episode of Invincible and there were two ads before the show even started, two in the middle of the show, and one at the end. It's freaking insane.

I barely even watch video these days, I get way more mileage out of a good music service like Qobuz or Tidal.

[–] tomkatt 2 points 2 hours ago

Context and tone matters.

"Hey, I figured out a way to cut our EC2 needs and scaled down, saving us a ton of money." "You genius!"

vs.

"Ummm.... I accidentally left half a dozen m8g.16xlarge nodes running... for the last four months." "You... fucking genius."

[–] tomkatt 1 points 4 days ago* (last edited 4 days ago) (1 children)

And it’s not a dementia thing, it’s an adhd+generalized anxiety thing. Piece of mind is pretty valuable to me and mine.

That's a fair take. I dunno, the potential security vulnerabilities outweigh any possible gains for me with most IOT devices, and I feel smart appliances are just more complicated to fix and more easily break down. Plus, the last thing I need is my washer to brick or my fridge to stop working from a botched firmware update.

[–] tomkatt 2 points 4 days ago* (last edited 4 days ago) (3 children)

With a wifi fridge for example I can know if it stops working and the temp starts rising before I have a fridge full of spoiled food.

You don't need a wifi fridge for this. My wife and I manage this via Home Assistant and cheap Switchbot sensors. Fully self contained on my network, nothing to phone home anywhere.

The rest of the things you listed are kind of silly. If you left the oven on, that sucks, but you're already gone. Also, who sets the oven on before leaving the house? That's just an odd... like, really odd thing to do. Like, senility/dementia level odd, at which point what difference is a notification? And the dryer thing... well, that's nothing a 15 minute wrinkle cycle doesn't already solve on a dumb dryer.

[–] tomkatt 3 points 4 days ago* (last edited 4 days ago)

It depends. I’m not saying I never pirate books. I’m not going to just support a publisher milking a book that should belong to the commons.

Also, some publishers have taken to raising ebook prices to as high or higher than hardback costs. For those I might buy one book by an author and pirate another. I won’t justify it other than to say I only ever bought paperbacks anyway and still remember those being like $3.99 to $6.99, so I’m not paying $18+ for an ebook novel because of publisher greed.

But if it’s an author I like, I buy their books, and support them in other ways (like with Sanderson’s Kickstarter for example).

[–] tomkatt 34 points 5 days ago (3 children)

Nah, no need to be a shitheel. I'm cool with paying for books, authors gotta eat. I wouldn't refund a book I've read.

[–] tomkatt 1 points 5 days ago

MOBI has been deprecated for a long time. Standard formats now are AZW3 (KF8) and KFX. They're a bit more advanced than MOBI, and thank goodness, since it was a terrible format. AZW3 is essentially a MOBI/EPUB container, and I believe KFX is equivalent to EPUB2, possibly with some EPUB3 features.

[–] tomkatt 5 points 5 days ago

Takes a small effort to set up (install Calibre, install NoDRM plugin, apply Kindle serial to plugin), but once it's done, the rest is literally drag and drop, it removes DRM from your books automagically.

[–] tomkatt 42 points 5 days ago (7 children)

Like hell I don't. Calibre plus NoDRM says otherwise.

[–] tomkatt 63 points 6 days ago* (last edited 6 days ago) (1 children)

My senior class in high school, the French and History teachers got together to plan a senior trip to Canada post-graduation, with stops in Montreal and Quebec. They let us have beers (on our own dime) if we wanted since the drinking age up there was 18, and one of my history teachers even offered a few of us Cuban cigars the last night of the trip since there was no embargo in Canada but we couldn't cross back into the US with them. Was a pretty good time.

We were warned the Quebecois could be kinda douchey to non-native speakers, but I found the whole trip was pretty chill, and as long as you were at least trying to speak French to them, they were more than accommodating for directions and help. Was a really memorable trip, 20+ years later still a very fond memory. Good teachers are great.

[–] tomkatt 1 points 6 days ago* (last edited 6 days ago)

Okay. I live in a town with a population barely over 2000 people, the paved road ends at my house and continues on as dirt roads, I'm surrounded by miles of empty lots of wild growth with a few houses interspersed here and there, and I have one direct neighbor across the street with the next two closest neighbors being a quarter mile up the road.

I guess I don't understand your definition of rural then. Or you don't understand just how far wifi signals can travel when there are no obstructions, or that people can have multiple network SSIDs in their home (hell, I have three, one for 2.4 GHz, one for 5 GHz, and then a separate 5 GHz for a work network). Rural doesn't mean tech illiterate.


Edit - and to be clear, most of the signals I see are probably too weak to be usable due to attenuation, but I can pick them up all the same via Wifi Analyzer. How many networks I see is dependent on the device used. Currently my mini-PC only sees my networks, then a Roku somewhere (probably neighbors across the street) and another single network at low strength, but it varies.

I used to easily see dozens or more networks in the city if sniffing for them. Your PC's wifi won't list all of them, just the strongest signals and there will still be many because city life is saturated that way.

[–] tomkatt 17 points 1 week ago

It’s a monument to human achievement that they work ~~as well as they do~~ at all.

FTFY.

 

New house, was built/finished just under two years ago. I live in a dry climate, have been in my house for two years and only now discovered this. After some recent storms led to water in my window track I found my rear sliding windows have weep holes in the bottom, but they weren't draining.

After a lot of testing (filling the track with water, shop vac'ing it out, blower testing with air gun, suction with vacuum, etc.) I realized the weep holes in the interior of the window track and the weep holes on the exterior have no connection whatsoever. No water goes from inside to outside, and air blowing through exterior hole is felt through other exterior, and likewise with the interior, but nothing is going from interior to exterior. Water in the inside track will drain until the portion underneath fills and then pools up, and likewise, if I spray water in the exterior weep holes, nothing gets to the inside track, but it eventually comes out the exterior weep hole on the other side.

After some research, I found it's not uncommon for this to happen, it's a common defect with these sort of windows and I just drilled into the exterior weep hole with a 1/8 bit until it met the interior channel and sure enough, the water drains out as expected now. Put the window track back in, window back on, and tested pouring water in the track, it's draining perfectly now.


My only questions are, do I have anything to be concerned about with this DIY fix? Since the climate here is normally very dry (high desert, Colorado) and moisture evaporates quickly, I'm not worried about mold, but is there anything to keep bugs from getting in through the weep holes? They're not covered in any way. Also, will there be any winter concerns with the cold in sub-zero temperatures or snow/ice build up?

Apologies if these are dumb questions, but I'd literally never heard of weep holes until this week, with discovering the issue. So not sure what potential issues they might have, and honestly no way to know if I fixed this as intended.

 

Really interesting sh'mup and great soundtrack. I especially like the stage 1 and stage 6 themes. It's amazing what the PC-Engine was capable of with the CD add-on.

Sadly, I'm terrible at it, and have never actually been able to play past stage 3, so good thing the first stage is such a banger. 😅

 

Fantastic game. I love the high energy beat here.

 

The current build of Jelos updated the libSDL from v2600.5 to 2800.1 and it broke a few ports. In particular the ones I know of are Panzer Paladin and TMNT: Shredder's Revenge. Both are fixed with the instructions below.

I saw in some threads people asking about it so here's the fix:


You'll need a copy of the 7/26 JELOS build or before from the github releases page and copy out the libSDL files from /usr/lib. To do this, you'll need to download the tar archive, then use something like 7zip to extract the SYSTEM file to a folder.

Copy off all the the libSDL2 related files that have a file size (ignore the ones that list as 0kb in size, those are symlinks). All told there are something like six files you need, the 2.0.so.02600.5 file, the ttf file, the image file, gfx file, and mixer.

You need to rename the filesaccording to the SDL2-CD.dll.config set in the game folder at /storage/roms/ports//dlls/

If you prefer, I already have all the correct files and renamed as needed. You can download them in zipped format here.


Once you have the correct files, correctly named, copy them into /storage/roms/ports//libs/

Lastly, edit the game's .sh file in /storage/roms/ports/ to add the following lines:

# # # export path for local libSDL
export LD_PRELOAD=$gamedir/libs/libSDL2.so.0

Add that to the script on its own line. I put it at line 29, after the "Loading... Please Wait." echo output line. Anywhere after the get_controls line should be fine.

If you mess up the file, or run into problems, the full file should look like this one.

From there, save it and run the game. And that should be it.

If you gather the files yourself instead of using the ones from the ZIP I linked and the game loads sideways (in portrait), get the libSDL2-2.0.so.0.2600.5 from the SYSTEM folder in the /usr/lib/SDL2-rotated path instead of /usr/lib, and copy it to your game's lib directory on the handheld, and rename it to libSDL2-2.0.so.0 to fix.

8
submitted 1 year ago* (last edited 1 year ago) by tomkatt to c/vgmusic
 

This is the Japanese version of Simple & Clean, the opening song for Kingdom Hearts.

Great song, been a fan of Hikki's music for over two decades now.

 

Sorry for double post the same song technically, but I love this version and Tiffany Mann's vocals are great.

 

My man on the drums is killing it in this version. Just watch him yo.

3
submitted 1 year ago* (last edited 1 year ago) by tomkatt to c/vgmusic
 

This song hits hard, I love it. Main theme kicks in around 28 seconds in.

5
submitted 1 year ago* (last edited 1 year ago) by tomkatt to c/[email protected]
 

I noticed that darker games on my x55 didn’t look good, like dark tones and blacks were almost inverted looking at stock settings. After a bit of tweaking, setting gamma from default (50%) to 67% got everything looking good.

After checking out a few YouTube videos it seems the gamma level on the display varies between units. I’ve seen it look good on default in some and even up to 100% on one video. Play with the setting and dial it in to what looks best for you.

If it helps I’m currently using:

  • brightness 68%
  • gamma 67%
  • contrast 52%
  • saturation 60%
 

Great soundtrack. This one's the battle theme from Ikenfell.

Also great game. The artwork is gorgeous (it was styled to look like a scaled up GBA game) and the combat system kind of feels like a mashup of Super Mario RPG and Mega Man Battle Network what with the tile system and timed attack bonuses.

 

Technically not game music, but nerdcore based on a game. Does this count? 😅

Terrible game from what I've heard (I haven't played it), but inspired a great song IMO. Mods, feel free to remove if this doesn't fit the theme of the community.

view more: next ›