nanook

@Max_P @mfat I don't like picture oriented Desktops, just a lot of shit competing with workspace, rather have simple drop down menus which is why I stick with Mate. Although a Doc like in MacOS isn't bad, and Mate does support this, it still eats up space I'd rather use for work.

Other than a few graphics, there is so little customization in Zorin that you can drop in the Ubuntu repositories and never notice the difference. And as far as from scratch goes, the first kernel I used as .98 or .99, not quite 1.0, cross compiled for Intel on a Sparc platform, then you had to spend another three days compiling the GNU userland, and then another couple of days for Xorg, at which point you had a mostly usable system.

@dink A fundamental property of X was that it was a networked protocol, it allowed you to display an application running on one machine, on another. The kernel X-server has in no way been inadequate in terms of performance. So that is what I continue to use. Wayland might someday make Linux a viable game platform helping it replace Windows, and in that sense I applaud it, and perhaps Wayland on Wires will eventually make it a viable network protocol but it's not there yet.

@data1701d Ok in that case, boot the os off of a USB and mount all the partitions, start with root on /mnt, then any other partitions relative to /mnt as they would be to root, then mount --bind /dev /mnt/dev, mount --bind /dev/pts /mnt/dev/pts, mount --rbind /sys /mnt/sys, mount --rbind /proc /mnt/proc, and then cp /etc/resolv.conf to /mnt/etc/resolv.conf, now chroot /mnt. Once there remove all existing versions of grub and install grub-pc, which is the bios version, next do grub_install /dev/sda or whatever your primary drive is, then exit chroot and halt the system. Now you should have a bios bootable system you can boot on your bios device.

Ubuntu will boot on either legacy or UEFI.

It can easily be configured to emit no sounds, and wake-up is usually a function of your BIOS settings, disable wake-up on LAN, etc and you won't have an issue.

I have been trying to turn up a Lemmy instance, I presently have a friendica instance, friendica.eskimo.com/, a hubzilla instance, hubzilla.eskimo.com/, and a mastodon instance, mastodon.eskimo.com/, but I have found getting Lemmy operational to be more challenging than these.

@MangoPenguin Same thing that happens to your car motor when you slam the accelerator from a dead stop rather than gradually accelerating and maintaining a steady speed. Everyone knows stop-and-go traffic is hard on cars, disk drives too.

When you spin up the drive, the motor has to overcome the mass of the disks to bring them up to speed, requiring more torque, current, and wear, than just keeping them at that speed. On the other hand, bearings don't wear out at zero RPM. Bearings go, motor goes, either way drive is dead. Regarding bearings ALWAYS mount drives so that they are horizontal, this results in minimal bearing wear and load.

I don't know how clonezilla works, but one thing I've discovered that causes issues when you copy a Linux distro from one machine to another, assuming you do a file system copy and not a raw partition copy so the new file system partition has a different UUID than the old, you need to fix the UUID in both /etc/fstab and /etc/initramfs-tools/resume before it will work properly.

@delirious_owl @gwilikers I've been trying to setup a store and forward server with postfix and not having a lot of luck.