myhouseonneptune

joined 1 year ago
[โ€“] myhouseonneptune 4 points 1 year ago

I like to tell my nieces that I'm doing really complicated magic, and you can tell because it requires so many extra wands! ๐Ÿ˜‚

[โ€“] myhouseonneptune 1 points 1 year ago

If you like things that are on the less serious side, the Humans Are Weird series by Betty Adams is hilarious, adorable, lighthearted, and fun. Usually written from the perspective of the various aliens, and she does a damn good job of it too. Been reading I Have the Data with friends, and it's been a grand time

[โ€“] myhouseonneptune 3 points 1 year ago

Oh! That looks just like it! I bet that's it, thank you!!

 

Hello, all! I've only recently jumped from dip pen calligraphy to the wonderful world of fountain pens, so I naturally found myself drawn to the Noodler's flex nibs. I've been using my Creaper for months now and figured I'd finally earned myself the next big sexy- the Triple Tail. It arrived yesterday, and it writes like a dream... mostly. I was dealing with some railroading issues, but I figured I just hadn't filled it quite right since I was filling from a sample vial.

Because it was a shimmering ink (Diamine Stargazer, if anyone's curious), I did a preliminary rinse in water before disassembling the pen for a proper clean. Once I got the nib and feed out, I noticed there was this rather large hole in my feed (see top two images)! My initial assumption was that it was defective, given that I'd already noticed the front underside had some mild imperfections (see bottom two images), but I noticed while I was washing it that the breather tube flows out of / through the hole. I've searched everything I know to search, and I cannot find a picture or even a video showing the top side of the disassembled feed in clear detail. So, owners of Triple Tails, please tell me: is this normal?

[โ€“] myhouseonneptune 2 points 1 year ago

I thought I recognized that art! I just love her work!! She did some character art for my D&D group, and it's phenomenal! This is her site, if anyone else is interested: https://galadrielcoffeen.com/

[โ€“] myhouseonneptune 3 points 1 year ago

I work in an environment where the accuracy and detail in my notes is critical, and the faster I write, the better both are. More than once, notes I took on something that seemed unrelated at the time were the key to figuring out what went wrong. Additionally, it's common in my field to work in places where the best case for being caught with an unauthorized device is said device being nuked from orbit, and worst case, still that but also being charged with treason ๐Ÿ™ƒ

Plus, it's just really satisfying to take notes in whatever color I feel like for the day ๐Ÿ˜

[โ€“] myhouseonneptune 1 points 1 year ago

Glad I could help! If you're interested, Worldwide Spin in Public day is the third Saturday in September, so you might check if your LYS is celebrating! They'll have better suggestions specific to your area and might even have some basic spindles and fiber to get you started!

[โ€“] myhouseonneptune 2 points 1 year ago

This was on a wheel, but could absolutely be done on a spindle! It definitely takes some practice to get a feel for it, but everyone spins "art yarn" for the first little while ๐Ÿคฃ

[โ€“] myhouseonneptune 3 points 1 year ago

I mainly buy dyed top roving, so I don't actually do any of the carding myself. I really want a blending board to make my own blends, but life keeps getting in the way. Maybe someday...

I know a lot of spinners actually prefer spindle spinning to wheel spinning! Personally, I went through quite a few different kinds of spindles before deciding I wanted a wheel, but I have a close friend who prefers the more precise control of spindle spinning

[โ€“] myhouseonneptune 2 points 1 year ago

The way I started was actually by going to my LYS's celebration of World Wide Spin in Public day which falls on the third Saturday in September! But all you really need is a drop spindle and some fiber!

(Disclaimer: I am in the US, so this is all based on what's available here and all monetary values are in USD.)

A basic starter spindle should run you between $15 - $20, but they're actually really simple to DIY if you prefer. My first spindle looks like someone assembled it in a craft store (which, honestly, they might have), but it gets the job done!

As for fiber, my favorite places are The Spinnery Store (I buy directly from their website, but their fiber is on Etsy under slimchicken) and BlueMoonAlpacas on Etsy, but any combed top roving will do. Corridale wool is my favorite, but most of what you'll find for cheap will probably be Merino. A lot of it will be in 4 oz braids, but 1 oz is plenty to start.

After that, I'd highly recommend JillianEve's Drop Spindle for Beginners video on YouTube! She has a wide range of spinning tutorials and guides and does a great job of explaining things!

[โ€“] myhouseonneptune 1 points 1 year ago (2 children)

Absolutely! I usually have a podcast up, but sometimes it's really soothing to sit with just my thoughts and the sounds of the wheel

[โ€“] myhouseonneptune 1 points 1 year ago

Oh no! I thought about trying to create one, but I honestly don't have time to moderate and wouldn't want to take it away from someone who does. Definitely let me know if you do manage to get it working!!

[โ€“] myhouseonneptune 1 points 1 year ago (2 children)

Admittedly, I've never processed my own wool before, but I do know the combed top roving I generally use is subject to a pretty long cleaning and preparation process. I know that the first thing to go is the natural body oils of the animal as well as any barnyard debris that might carry bacteria. Dyed wool, like what I've used here, is also bleached first to remove any natural variation in the color of the wool that might interfere with the dye color. The difference between dyed combed top roving and wool yarn you'd find at the store is one water bath to set the twist. I found this site detailing the process here: Processing Wool to Yarn

If you're still concerned about it, there are vegan alternatives, such as bamboo or flax fibers out there! I get a lot of my supplies from thespinnerystore.com (not affiliated, just a fan) and they stock a fair few alternative fibers.

 

Still haven't found a dedicated handspinning community, but I'm hoping this will tempt some of y'all to the dark side ๐Ÿ˜‰

I spun this last year, but haven't yet found a project worthy of it (open to suggestions!). Fiber is Merino wool, colorway is Tie Dyed Popsicles by the Wooly Witch, spun on my Babe's Fiber Starter wheel. It's about 15-16 WPI, so roughly a light fingering weight, and 170g. Planning to leave it a single since plying it might muddy those glorious, glorious colors, and that would be a travesty! ๐Ÿ˜

Still a fairly new spinner, all things considered, and mostly self-taught, so I'm open to any constructive criticism and willing to answer any questions y'all might have! Thanks for letting me briefly invade your knitting space! ๐Ÿ˜

view more: next โ€บ